OLD Support Thread (Ask questions here!) OLD

[Mazzlefizz]

OK, guys, the overlapping raid frames is because sRaidFrames changed the format of the settings and now it defaults to sort by class. If you change it to sort by group, all the frames should one again appear as they should be. To do so, go to DeuceCommander in your Fubar and select the following: Raid, then sRaid, then Filter Sets, then Set:By group, then Use This Set. You should then get the proper layouts and be able to hot switch them via the MazzleUI Fubar entry.

[Koonihc]

I am in love with Mazzle and have been talking the S out of it to my friends. Here is one thing I am still baffled with.

I use thottbot and the like to read about quests, one of the things I like is helpful coordinates. Now that I am using Mazzle, I have two sets, (longitude and Lattiude).

When I get coordinates, like 53.39, whats the best way to plot them in the map that has two sets of coords? Thanks!!!

[Arkive]

Originally Posted by Koonihc I am in love with Mazzle and have been talking the S out of it to my friends. Here is one thing I am still baffled with. I use thottbot and the like to read about quests, one of the things I like is helpful coordinates. Now that I am using Mazzle, I have two sets, (longitude and Lattiude). When I get coordinates, like 53.39, whats the best way to plot them in the map that has two sets of coords? Thanks!!!

Type this in the console:

/way x,y note

Where x,y are the coordinates, and "note" is a description of the location. You can put as many in at a time as you want, just be sure you're in the zone they relate to. you can then go into the map and right-click, "Set as waypoint" on the note you want as your current destination, as well as to remove when you're done.

[123noob]

Originally Posted by Mazzlefizz OK, guys, the overlapping raid frames is because sRaidFrames changed the format of the settings and now it defaults to sort by class. If you change it to sort by group, all the frames should one again appear as they should be. To do so, go to DeuceCommander in your Fubar and select the following: Raid, then sRaid, then Filter Sets, then Set:By group, then Use This Set. You should then get the proper layouts and be able to hot switch them via the MazzleUI Fubar entry.

Thank you.

[Zinazeri]

I know this question has been asked before, but I never saw that it got an answer. Does anyone know if it is possible to make it so that you can right-click to self-cast? I have used this with Trinity Bars, and I love it, but I cannot seem to get it to work with Mazzle. That is the only thing that I do not absolutely love about this mod. Thank you, Mazzle and the beta testers, and the support community.

[Vint]

Originally Posted by Zinazeri I know this question has been asked before, but I never saw that it got an answer. Does anyone know if it is possible to make it so that you can right-click to self-cast? I have used this with Trinity Bars, and I love it, but I cannot seem to get it to work with Mazzle. That is the only thing that I do not absolutely love about this mod. Thank you, Mazzle and the beta testers, and the support community.

Bongos doesn't support this functionality (that I'm aware of) you might want to look at the configuration options for Clique to see if you can configure that to your liking

[NocteKT]

First off, awesome work, Mazzle. I used this UI back before the 2.0 changes and I'm glad to see it up again.

I love everything, except one thing....how do I stop broadcasting the sheep messages into raid/party chat? I like having the sound effect when my CC breaks, I just need to get rid of the raid broadcasting or I might find myself in need of a new guild, haha. I've looked hard through all of the various addons, but I can't seem to find the one that does the CC messages.

[iljott]

Originally Posted by Haike question: how do i change the bags/ammo pouch wif mazzle?i cant seem to change my ammo pouch

Click on the MazzleUI text at the bottom right-hand (just above the icons). It toggles your bags and ammo pouches.

[Skylerzio]

If you look closely this picture isnt blurry, the item descriptions are overlapped. one has The Disenchant info, the other doesn't. When I disable EQcompare, the item info that does not have the disenchant info stays and the one that does stops showing up. Anyone know how i can switch that around so that i only see one itme info with the disenchant info?

[MiniNightMana]

Love the UI.

Is there a way to add a 2nd target on target for your current target or make the one below the character picture bigger..I am having trouble reading and clicking on it.
Thanks

[trickdaemon]

How can I edit the combat log on the far right? I want it to show deaths so I know who to blame in karazhan, etc. . (love the ui, keep up the good work)

[owensd]

Originally Posted by trickdaemon How can I edit the combat log on the far right? I want it to show deaths so I know who to blame in karazhan, etc. . (love the ui, keep up the good work)

You need to enable the tab for the chat window using prat, then you can modify the channel information normally.

[coniferous]

Originally Posted by trickdaemon How can I edit the combat log on the far right? I want it to show deaths so I know who to blame in karazhan, etc. . (love the ui, keep up the good work)

Take a look at the prat addon on the fubar at the left, you can configure what is shown in the chatboxes.

You can experment from there.

[Ghil]

what's the trash can addon when you visit a merchant?

[coniferous]

Originally Posted by Ghil what's the trash can addon when you visit a merchant?

It will automagically sell all gray items when you click it. Its part of the GarbageFu mod.

Edit:thanks Seerah. I used to use a mod called autoprofit - it looked exactly the same. My bad.

[trickdaemon]

one last question, i cannot see tradeskill windows. I can press escape and i hear the close sound, but i cant see the window. thanks

[Seerah]

Originally Posted by coniferous It will automagically sell all gray items when you click it. Its part of the auto profit mod.

GarbageFu

[gamble]

I got mazzleui working great on my main but when I tried to start it on my first alt, I can't get it to mazzify or whatever the name is that actually accepts the settings. It looks like it is going find and i hit mazzify me, the gnome lifts her arms and i hear the noise but the next click to finish button never appears. I do hear the 'uh-oh' whistle sometimes (on load and when trying to click some mods from mod list in mazzify screen). I have looked for another window that says a /reloadui is needed to activate some mods (this was needed on my main) but I haven't seen anything else.

Ideas?

[dadmanic]

After messing with this kewl and clean UI. I was having trouble with bags saying item can't fit in container and the shard for the warlock if I had in one and try to put in my shard bag it wouldn't let me. Any input would help. Also dont totally understand the the bags that pops up when you are at a vendor.. I know the specify what the items are that you have. but is there a way to disable that? Also is there a way to have the bags pop up as one big bag instead of indiviual bags? I really like the UI just have a few problems that I know could b worked out.

[iljott]

Originally Posted by dadmanic After messing with this kewl and clean UI. I was having trouble with bags saying item can't fit in container and the shard for the warlock if I had in one and try to put in my shard bag it wouldn't let me. Any input would help. Also dont totally understand the the bags that pops up when you are at a vendor.. I know the specify what the items are that you have. but is there a way to disable that? Also is there a way to have the bags pop up as one big bag instead of indiviual bags? I really like the UI just have a few problems that I know could b worked out.

Take a look at Durzil's answer in this thread. If you read the questions when Mazzifying you'd find that one of the first questions is about bags <-- can't remember the question, but remazzify and take a better look. It will enable Baggins.