OLD Support Thread (Ask questions here!) OLD - Page 53

Mazzlefizz · 03-17-07, 12:52 AM

Originally Posted by gamble

You might be answering this but I wanna make sure my question came across correctly. I want to check the bindings that bring up the context menu, not worried about binding something I've placed in there. This is mainly a problem when I've accidentally reset wow defaults and can no longer bind a key to open the context menu. Thanks

Look under the MazzleUI category in the key bindings. There's a binding there labelled "Toggle Context Menu".

Mazzlefizz · 03-17-07, 12:53 AM

Originally Posted by rbcjr

Well what I was trying to do was purchase another bank bag slot, and I just don't see where I would do that at.

Well, I see the normal bank window in addition to the Baggins windows. You should be able to buy slots right from there.

gamble · 03-17-07, 01:25 AM

Originally Posted by Mazzlefizz

Look under the MazzleUI category in the key bindings. There's a binding there labelled "Toggle Context Menu".

awesome, that's exactly what I was looking for. Thanks for the help

WaldoJeffers · 03-17-07, 03:19 AM

somethig random happened last night, when i woke up i had to remazzify everything all over again and edit all my profiles and all the other bits and pieces, and now some addons i installed myself are now incompatible, was there an update or something? anyone else had this?

Nurdakin · 03-17-07, 09:37 AM

I tried to look for a similar topic, but was unable to find one. Basically, my release window is right in front of the loot window, so if i die before a boss dies, and they loot, i can't roll on it. I'm going to try to unlock all windows and see if i can move the loot window here in a few minutes and see how that goes.

Ryoushii · 03-17-07, 09:45 AM

Originally Posted by Nurdakin

I tried to look for a similar topic, but was unable to find one. Basically, my release window is right in front of the loot window, so if i die before a boss dies, and they loot, i can't roll on it. I'm going to try to unlock all windows and see if i can move the loot window here in a few minutes and see how that goes.

The program that runs the loot window is XLoot and there should be a tab for it in FuBar. Look for it there and you should be able to unlock it, show the anchors for the windows, etc.

Raskol · 03-17-07, 05:14 PM

I'm having trouble with the mouseover menus in FuBar. In several of the menus (like factionsFu), you can just mouse over it and get a quick menu. In this popup menu, when you mouseover menu items, they get hightlighted and you can click on them.

That's not working for me anymore - I get the mouseover menu, but it is completely unresponsive - no highlighting, and not clickable. I have to click on the fuBar icon and go through the hierarchy of 'normal' menus to get to the options that normally are just a few mouseovers and one click away in the 'quick' menu.

I've tried re-mazzifying the fuBar several times. Each time, the menus work for a minute or two afterwards, but soon stop working again. I'm not sure what else to try.

I am using one additional mod - Yata, a totemtimer - but this behavior didn't show up until a few weeks after I started using it, so I'm not convinced it is related.

Any ideas?

iljott · 03-18-07, 06:06 AM

Originally Posted by Raskol

I'm having trouble with the mouseover menus in FuBar. In several of the menus (like factionsFu), you can just mouse over it and get a quick menu. In this popup menu, when you mouseover menu items, they get hightlighted and you can click on them.

That's not working for me anymore - I get the mouseover menu, but it is completely unresponsive - no highlighting, and not clickable. I have to click on the fuBar icon and go through the hierarchy of 'normal' menus to get to the options that normally are just a few mouseovers and one click away in the 'quick' menu.

I've tried re-mazzifying the fuBar several times. Each time, the menus work for a minute or two afterwards, but soon stop working again. I'm not sure what else to try.

I am using one additional mod - Yata, a totemtimer - but this behavior didn't show up until a few weeks after I started using it, so I'm not convinced it is related.

Any ideas?

I remember having an issue like this in a previous MazzleUI beta. Iirc, the problem was with FuBar or one of its addons not being updated with the latest version. Have you tried updating FuBar and it's addons to the latest version?

amz370 · 03-18-07, 12:21 PM

i had a similar problem it turned out i had an incompatable addon that was casuing tootip trouble

soulshred · 03-18-07, 03:54 PM

Bars in MazzleUI druid/warrior/rogue layout will stop changing based on stance if you use any of the Blizzard page changing bindings, which causes the Bongos page-changing mechanism to go out of sync. It's very easy to do this accidentally, especially the shift-mousewheel combo.
I'd recommend unbinding all Blizzard page-changing bindings when playing classes that change forms/stances/stealth; they are under the action bars category in the bindings.
If you do want to rebind the forms/stances/stealth buttons, use the Bongos binding mechanism. Read the layout description to see what the default bindings are.

I did this as I am a druid. now my issues is that my bars will not change when i go to cat form. They change when i go to bear with no problems. this is a fresh install so i have not been able to screw anything up to my knowledge.

Thanks

Achle · 03-18-07, 09:15 PM

Hey guys, one question:

How can I disable the cast bar that comes with this suite? I have another cast bar that I use (self cast bar not enemy cast bar), and I can't figure out how to disable this one.

I'd appreciate any help. Thank you.

secretskwerl · 03-18-07, 09:17 PM

whenever i go to stealth my main bar doesnt change, i know theres a way to manually do this, but im not sure.

123noob · 03-18-07, 10:11 PM

Originally Posted by Achle

Hey guys, one question:

How can I disable the cast bar that comes with this suite? I have another cast bar that I use (self cast bar not enemy cast bar), and I can't figure out how to disable this one.

I'd appreciate any help. Thank you.

you can manually disable it through MazzleUI option - list of addons.

Sputter · 03-19-07, 08:01 AM

sorry for creating a thread about this. (silly me not reading the "dont make a new thread for any question" )

I recently picked up my healer again and am very used to click casting, but I having a hard time with it and the group models. Specifically where I can click cast over a party member.

I thought I saw a post about this before referencing only part of the 3d models can be moused over for this. Can anyone help direct me, or explain to me how to enable more of the model to be used as a target?

In the middle of a frantic fight if a cast fails to get the target, I have to hit escape and re-try to click over the right part of the model is getting really annoying. I'd hate to drop this UI or clutter it with another mod just for group buttons I can reliably target.

<insert here the usual disclaimer of I read the faq blah blah blah, please help>

Anyone else have this problem?

pokyoky · 03-19-07, 09:00 AM

@Sputter
yes it is a known issue with the cick casting being problematic. I suggest using castparty which adds a set of health bars that dont take up much room, allow you to focus in one spot, and clique works great on them

Mazzlefizz · 03-19-07, 11:14 AM

Originally Posted by 123noob

Originally Posted by Achle

Hey guys, one question:

How can I disable the cast bar that comes with this suite? I have another cast bar that I use (self cast bar not enemy cast bar), and I can't figure out how to disable this one.

I'd appreciate any help. Thank you.

you can manually disable it through MazzleUI option - list of addons.

That's not actually true. It's just the standard blizzard casting bar with different artwork.. If you add a casting bar add-on, I assume it would stop the blizzard one from showing.

Mazzlefizz · 03-19-07, 11:33 AM

Originally Posted by Sputter

sorry for creating a thread about this. (silly me not reading the "dont make a new thread for any question" )

I recently picked up my healer again and am very used to click casting, but I having a hard time with it and the group models. Specifically where I can click cast over a party member.

I thought I saw a post about this before referencing only part of the 3d models can be moused over for this. Can anyone help direct me, or explain to me how to enable more of the model to be used as a target?

In the middle of a frantic fight if a cast fails to get the target, I have to hit escape and re-try to click over the right part of the model is getting really annoying. I'd hate to drop this UI or clutter it with another mod just for group buttons I can reliably target.

<insert here the usual disclaimer of I read the faq blah blah blah, please help>

Anyone else have this problem?

Since you've mentioned a disclaimer about having read the help resources, I'll say that this issue has been discussed many times in these threads. So, to say it again...

I turned off click-casting on the 3d models b/c in the 1.6 aspect ratio, there's a huge area to the side of each unit frame you can use for click-casting. Unfortunately, this doesn't work well in the other aspect ratios because the unit frames are narrower, and the 3d model's frame covers a lot of it. It was an oversight. Whenever I get back to working on things, I'll re-enable click casting on the models for those aspect ratios.

123noob · 03-19-07, 02:30 PM

Originally Posted by Mazzlefizz

That's not actually true. It's just the standard blizzard casting bar with different artwork.. If you add a casting bar add-on, I assume it would stop the blizzard one from showing.

Oh, sorry I was refering to cast bar like the enemy cast bar addon and stuff, not the default cast bar.

Achle · 03-19-07, 03:10 PM

Hmm, I use X-Perl, and it has a built in casting bar, but no option to disable default one. Is there any other to disable it?

EDIT: Nevermind, I found it within X-perl options. Thank you for your help.

PS. Thanks so much for this awesome interface, I absolutely love it. I can't even imagine the months and months of time that must have gone into this.

Arkive · 03-19-07, 07:11 PM

Originally Posted by 123noob

Oh, sorry I was refering to cast bar like the enemy cast bar addon and stuff, not the default cast bar.

If you mean the enemy cast timers, then I believe those are run by Antagonist (though I sometimes get a few of the many millions of mods in this compilation mixed up).